Quote:
Originally Posted by Indomwe
The 61 standard column with Column shifter has to be modified to fit a rag joint. Between the borgeson power steering box there is only 1.5 inches to the shift linkage and with the rag joint we need about 3 inches. According to borgeson there is a modification that can be done and another guy on the HAMb has done this but I have not been able to find out exactly how this modification is done. I am wondering if anyone else on ford barn has experience and can help
|
same problem I have with my '60. If you shorten the column enough to install a rag joint, the shifter shaft and linkage and NSS if you have a column mounted switch, will have to be moved up an equal am't. May turn into a can of worms.