View Single Post
Old 09-09-2023, 04:30 PM   #1
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,778
Default Pair of 97's set up to be secondaries

City: Kerrville
State: Texas
Price: $250 pr.

These 97's were modified to be used as secondaries in a 3x2 set up. All the choke parts were removed. The throttle stops were secured to the base so the throttles could be adjusted open a little. They have been completely disassembled, inspected, cleaned, and reassembled. New kits were installed. The bleed jets, emulsion tubes, jets are all fine and stock. The idle circuits are complete and have new screws. The accelerator circuits were tested and the nozzles flow fine. The top screws were replaced with stainless ones and empty holes plugged with stainless set screws. Bases and linkages were painted. Everything moves fine. One lid has a filled hole from a SouthWind heater installation. It is hard to see.

Last edited by Andy; 09-12-2023 at 09:43 AM.
Andy is offline   Reply With Quote