Re: Wesenberg EVR- voltage cycling problem
Katy, You can do that but the other end that would normally be connected to the third brush should then be connected to the hot brush. Or you can move the third brush to the maximum current position but that may limit the generator output . In my mind it is simpler to disconnect the wire that runs to the third brush and connect it to the FLD terminal of a type B regulator.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|