View Single Post
Old 08-02-2023, 04:27 PM   #6
JeffB2
Senior Member
 
JeffB2's Avatar
 
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
Default Re: Adjusting Brakes on a 54

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 54FordYBlockGuy View Post
OK, got the 12-volt conversion problem somewhat solved; now going to attempt to adjust, and bleed the brakes on this 54 Customline. No power brakes, manual. The pedal is as hard as a rock, with very little movement, but she stops.

Q. What type of fluid to you suggest

Q. Is the bleeding done similar to a Power Brake Bleed, pump, crack the bleeder, and repeat until no air, nice flow.

Q. Any other adjustments required?

Appreciate the replies.

JPL/OH
1952-54 Ford cars use the same brake shoes as 1967-71 Mustang V8 cars for about $60 you can convert your '54 to self adjusting brakes. POL also has shoes that are ceramic Kevlar that will reduce brake fade by about 25%. You can also upgrade to a dual master cylinder using the 1967-74 Mustang master cylinder for manual brakes for under $90
JeffB2 is offline   Reply With Quote