01-05-2023, 10:46 AM
|
#18
|
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,060
|
Re: bent Travers rods
Quote:
Originally Posted by cas3
A panhard bar would be an easy fix. The "radius rods" , I assume we are talking about is different because the tubes are tapered, not round. To press without leaving press marks on the tube, one would want a proper jig, and wood blocks with a radius matching the tubes to prevent making flat spots where you press, and another person to eyeball from the end while you pump the press. As Kube stated, time consuming.
|
Exactly!
__________________
"I can explain it for you. However, I can't understand it for you".
|
|
|