The Ford Barn - View Single Post

AllenV · 11-28-2019, 11:53 AM

Thank you for the welcome. Regarding temperature gauges and such, the truck was converted to 12V in a haphazard and incomplete fashion. Basically the stock gauges were disconnected in favor of a little aftermarket set mounted below the dash. One of the sub-projects is to rewire the truck and do it right. Thank you for the heads up on sensors.

11-28-2019, 11:53 AM	#7
AllenV Member Join Date: Nov 2019 Location: Rio Grande Valley, NM Posts: 67	Re: '55 F100 new project, new member Thank you for the welcome. Regarding temperature gauges and such, the truck was converted to 12V in a haphazard and incomplete fashion. Basically the stock gauges were disconnected in favor of a little aftermarket set mounted below the dash. One of the sub-projects is to rewire the truck and do it right. Thank you for the heads up on sensors. __________________ Allen '55 F100 with slightly newer 292 Y-block find the detailed project story at https://www.ford-trucks.com/forums/1...o-project.html