View Single Post
Old 03-21-2011, 07:21 AM   #60
sturgis 39
Senior Member
 
Join Date: Aug 2010
Location: Lead. South Dakota
Posts: 963
Default Re: Not getting fire!! Won't start. PLEASE HELP FAST!!

Make sure the points are open and test the resistance from the movable part of the points to the engine block. This should be an open circuit with the points open. The starter could be the problem as Mike V pointed out. The starter could be bad and taking all of the power away from the ignition. You could crank the engine by hand if this is the problem. I have never cranked a model "A" by hand. Never push on the crank is what I have been told. If you crank the engine wrong you can break your arm.

WHERE IS THE PRESIDENT OF THE CLUB WHEN YOU NEED HIM? Maybe somebody else will stop by and help.
__________________
IF IT CAN NOT BE FIXED WITH BLASTING WIRE, JB WELD OR DUCT TAPE ---IT CAN NOT BE FIXED

Do not get me started on the stupidity of ethanol. I think one of the monitors is from Iowa and he will delete the thread.
sturgis 39 is offline   Reply With Quote