Re: Engine Vibration
Good Evening...It seems to me that you have a problem with the re-built engine that you are not going to be able to solve on your own. Before damage is done to the engine, talk to the engine re-builder and see if they would like you to put the car on a trailer and bring it to them as it is. Then they can hear and feel the problem and figure out what the issue is. Hopefully the re-builder is not too far away from you. The safest way to take delivery of a rebuilt engine is to have it completely assembled at the re-builder and run on their test stand as proof of a good rebuild. The flywheel, clutch and pressure plate should be in place. If all is well on the stand, then it will install well. If there is a problem, you have the correct folks assembled to figure it out before it is put in the car. Good Luck...Ernie in Arizona
|