The Ford Barn - View Single Post

Ol' Ron · 07-16-2018, 05:01 PM

I always think of the application vs Cost. If you just want a driver, just bore it to 3 5.16 install a set of Egge 3 ring pistons, Eab heads on the 59 block and you;ll have a nice driver at a reasonable cost You won't even have to have the thing balanced with the original crank assy. Built a bunch of these back in the day.

07-16-2018, 05:01 PM	#4
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,888	Re: Building up my 59AB I always think of the application vs Cost. If you just want a driver, just bore it to 3 5.16 install a set of Egge 3 ring pistons, Eab heads on the 59 block and you;ll have a nice driver at a reasonable cost You won't even have to have the thing balanced with the original crank assy. Built a bunch of these back in the day.