The Ford Barn - View Single Post

AnthonyG · 04-06-2018, 03:41 PM

Getting ready to remove waged studs. I believe DD indicated a hole saw was best method to get rid of Swaged area. Thinking use the ID to cut out side portion of the stud with the swaged area? Obviously hole saws are bought by the OD hole size any one know which size to get for the 1/2" ID which is the size of the stud OD?. So I don't have to open several packages as pretty sure the store won't find amusing, LOL.

04-06-2018, 03:41 PM	#79
AnthonyG Senior Member Join Date: May 2013 Location: Pa. Posts: 2,181	Re: Switching to juice brake question Getting ready to remove waged studs. I believe DD indicated a hole saw was best method to get rid of Swaged area. Thinking use the ID to cut out side portion of the stud with the swaged area? Obviously hole saws are bought by the OD hole size any one know which size to get for the 1/2" ID which is the size of the stud OD?. So I don't have to open several packages as pretty sure the store won't find amusing, LOL. __________________ Nomad