View Single Post
Old 12-25-2017, 03:57 PM   #3
Purdy Swoft
Senior Member
 
Purdy Swoft's Avatar
 
Join Date: May 2010
Location: Alabama
Posts: 8,099
Default Re: Rear Spring Mounting Issue

All of the rear spring U bolts that I have seenare too long . Its either shorten and redrill or find good originals . there could be a risk of longer U bolts striking the banjo housing on bumps . I've never had it happen but have seen untrimmed , new spring center bolts strike and bend the banjo . If nothing else , too long U bolts don't look correct .
Purdy Swoft is offline   Reply With Quote