[Scott H in Wheaton]

I'm back working on my project after letting it sit most of this year.

I'm hooking up the Tyree wiring harness and starting to do the underdash part. I've done a few searches and looked at dozens of posts but have not been able to find what I need.

Mounting a repro stock fuse block with ignition resistor to the firewall, does the fuse go to the left side or the right side.

Then, which wires go on each side of the fuse and each side of the resistor.

Do the wires go over the top of the fuse block to connect, or do they come up from underneath?

Thanks for any help...I'm in the process of moving from Chicago to Indy and my books and diagrams are already at the new house!