The Ford Barn - View Single Post

CWPASADENA · 07-01-2017, 06:41 PM

With the engine running at about 1000 RPM, momentarily jumper across the cut out and see if the generator then is charging.

If so, change the cut out.

Chris W.

07-01-2017, 06:41 PM	#3
CWPASADENA Senior Member Join Date: May 2010 Location: PASADENA, CA Posts: 1,893	Re: Generator Problems With the engine running at about 1000 RPM, momentarily jumper across the cut out and see if the generator then is charging. If so, change the cut out. Chris W.