Quote:
Originally Posted by cas3
for the record, GM, sorry, i know you ment well, but the nappa IH 200 is the ballast resistor recommended by skip, and the condenser is FA54, as Bubba says. i'm not so smart, but i just went over it with skip recently. best wishes, skip....also!
|
Sorry IH-200 is the condenser. You better call Skip again to
refresh your conversation. He uses the stock Ford resistors for
6 volts we don't tike the little after market replacements. For
12 volt conversions with Skips coil the large white 1959 Ford
resistor. G.M.