The Ford Barn - View Single Post - 1942 to 1948 Dropped and Drilled Front Axle

Cliff Ramsdell · 03-23-2017, 05:50 PM

Sold sold sold

Hi all,
I have this 42-48 dropped and drilled axle. I had this under my Model A hot rod and went thru the car this winter changing it from a spring in front to a spring on top setup.

Was relieved for clearance for dropped bolt on steering arms, 40 1/2 between the perch holes and 49 1/2 at the king pin holes.

Small holes had shock studs in them, other holes are about 1 1/4" diameter.

Nice and straight, all I did was clean it up.

$old + shipping

Cliff Ramsdell

03-23-2017, 05:50 PM	#1
Cliff Ramsdell Senior Member Join Date: Feb 2011 Location: Windsor Locks, CT. Posts: 244	1942 to 1948 Dropped and Drilled Front Axle City: Windsor Locks State: CONNECTICUT Price: Sold Sold sold sold Hi all, I have this 42-48 dropped and drilled axle. I had this under my Model A hot rod and went thru the car this winter changing it from a spring in front to a spring on top setup. Was relieved for clearance for dropped bolt on steering arms, 40 1/2 between the perch holes and 49 1/2 at the king pin holes. Small holes had shock studs in them, other holes are about 1 1/4" diameter. Nice and straight, all I did was clean it up. $old + shipping Cliff Ramsdell Last edited by Cliff Ramsdell; 04-12-2017 at 10:35 AM.