Quote:
Originally Posted by reggiedog
The whole front end was just re-built so that isn't it as when the car was running we looked at all of that and couldn't find a thing wrong with it.
|
Rebuilt by whom?
Someone with experience?
What
exactlywas rebuilt?
What specifications were used?
Model A Front Axle Specifications:
As late as 1934, the 1934 Motors Magazine was showing 1931 Model A Ford front axle specifications as being the same as that specified by Ford:*
a. Two (2) degrees for camber; and,
b. One-sixteenth (1/16) inch for toe-in; and,
c. Seven (7) degrees inclination angle for king pins.
And then there is this information;