Thread
:
Crankshaft end play
View Single Post
01-02-2017, 10:42 PM
#
15
Tom Wesenberg
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Re: Crankshaft end play
I also had an engine with a lot of end play, and it didn't leak excess oil. I didn't measure the end play, but it was at least .100". I had to tear the engine down due to the center main being shot.
Tom Wesenberg
View Public Profile
Send a private message to Tom Wesenberg
Find More Posts by Tom Wesenberg