The Ford Barn - View Single Post

Ken/Alabama · 09-28-2015, 06:57 PM

Remove the upper radiator hoses. Then remove the belt. Then fill the block with water till the level is up to the top of the neck. Start the engine and watch for bubbles.

09-28-2015, 06:57 PM	#5
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,274	Re: leaking head gasket Remove the upper radiator hoses. Then remove the belt. Then fill the block with water till the level is up to the top of the neck. Start the engine and watch for bubbles.