Forum: Model A (1928-31)
Today, 01:35 AM
|
Replies: 4
Views: 129
Re: Horn
It might be my turn to modify what I said. If the fields or armature are shorting to earth, I don't think the horn would work no matter what he did. Hmmm.
|
Forum: Model A (1928-31)
Yesterday, 10:26 PM
|
Replies: 4
Views: 129
Re: Horn
That is one place there could be an issue. So is failed insulation in the field windings or armature. To determine where the problem is, you will need to dismantle the horn is do some tests. That's...
|
Forum: Model A (1928-31)
Yesterday, 10:18 PM
|
Replies: 21
Views: 676
Re: Opinion Re Differential Gear Ratio
On 2 of my cars, I run 5.25X21 tyres on the back and a stock 3,78 rear end. That gives me an effective ratio about the same as running a 3.54 diff (to within 1%). By the time I engage the 26%...
|
Forum: Model A (1928-31)
05-02-2024, 05:43 PM
|
Replies: 13
Views: 2,145
Re: Leakless Water pump
How does reducing the efficiency of a component improve the overall performance of the system. IT DOESN'T! At the very best, it disguises the problem. The pump pulls water from the lower tank...
|
Forum: Model A (1928-31)
05-01-2024, 08:20 PM
|
Replies: 5
Views: 462
Re: Shipping NOS axles
Bob, for a package to come by surface from the US, 5 months is normal. That is about the same time as when ships had sails. If US customs wants to look at what is in a container, add another couple...
|
Forum: Model A (1928-31)
05-01-2024, 08:16 PM
|
Replies: 24
Views: 1,231
Re: Snyder's New Catalog Came...and a Warning!
IMO, the REALLY GLOOMY part of that is, the younger people have either no desire or ability to make these things. Is it any wonder China is so dominant? You'd be amazed if you knew how much of your...
|
Forum: Model A (1928-31)
04-29-2024, 06:23 AM
|
Replies: 11
Views: 878
Re: New toy to play with this year!
I'll go along with that. Bringing the hulk of an old car back to life is a satisfying undertaking, then comes the driving and the making of friends while doing both. I really don't know why more...
|
Forum: Model A (1928-31)
04-29-2024, 04:05 AM
|
Replies: 20
Views: 969
Re: Jazz Age '28 Sport Coupe on Hemmings Auction
When the Mustang was released here a very few years ago, it scored only 2 out of 5 stars safety rating. One of its downfalls I am told is the weak rear end which leaves the fuel tank vulnerable(no...
|
Forum: Model A (1928-31)
04-28-2024, 06:29 PM
|
Replies: 7
Views: 787
|
Forum: Model A (1928-31)
04-28-2024, 06:26 PM
|
Replies: 25
Views: 1,562
Re: Motor Meter or Quail
I have 4 Model As ranging from a VERY nicely restored one to what looks like a barn find repaired but never restored. It is the one that looks neaten up and a real bomb that I like driving the best....
|
Forum: Model A (1928-31)
04-28-2024, 06:21 PM
|
Replies: 10
Views: 733
Re: Water pump
All of my water pumps have sealed ball bearings front and back and a modern seal. With nothing rubbing on the shaft, I figure they will last as long as a modern one does and who ever hears of a...
|
Forum: Model A (1928-31)
04-28-2024, 06:13 PM
|
Replies: 21
Views: 980
Re: Interested Dash information
Hmmm, a flame so close to a possibly leaking fuel gauge. Not that a flash of flame would be likely to cause a serious fire but it could give the driver or passenger a fright.
|
Forum: Model A (1928-31)
04-28-2024, 06:10 PM
|
Replies: 8
Views: 555
Re: Trip to nationals
Gary and Lawrie, Thanks for posting. I will also be driving to Maryborough for the National. I was in Maryborough, Victoria yesterday, as it happens.
We (Glenda and I) will be travelling with 3...
|
Forum: Model A (1928-31)
04-27-2024, 11:57 PM
|
Replies: 4
Views: 479
|
Forum: Model A (1928-31)
04-18-2024, 03:39 PM
|
Replies: 10
Views: 708
|
Forum: Model A (1928-31)
04-17-2024, 09:44 PM
|
Replies: 13
Views: 1,133
|
Forum: Model A (1928-31)
04-17-2024, 08:25 PM
|
Replies: 10
Views: 708
Re: Front left wheel play
Driving the cotter pin (yes, that is a cotter pin https://en.wikipedia.org/wiki/Cotter_(pin)#:~:text=A%20cotter%20is%20a%20pin,it%20means%20a%20split%20pin.) in with a hammer puts a far greater...
|
Forum: Model A (1928-31)
04-17-2024, 06:03 PM
|
Replies: 10
Views: 708
Re: Front left wheel play
That is exactly what causes the eye in the axle to stretch. Then, the only cure is to replace the axle or have the eye shrunk and reamed back to original size.
I hope for the OPs sake, that is not...
|
Forum: Model A (1928-31)
04-16-2024, 09:23 PM
|
Replies: 26
Views: 1,798
Re: Beautiful Day To Breakdown !
I have done something very similar to that. I figure it is an easy way to test the condenser roadside so long as the spare is good (test it first). If the car stops and the condenser could be the...
|
Forum: Model A (1928-31)
04-16-2024, 09:15 PM
|
Replies: 12
Views: 773
Re: Sealed beams
Russell, you will have opened up that argument again!!! I would not touch LEDs - you can't focus them properly and I don't like the idea of a dazzled driver coming towards me. Sure, they are bright -...
|
Forum: Model A (1928-31)
04-16-2024, 09:12 PM
|
Replies: 10
Views: 708
|
Forum: Model A (1928-31)
04-16-2024, 06:31 PM
|
Replies: 27
Views: 2,345
Re: "Special" Intake Manifold?
I agree with that. The post for the bell crank has been cut off and drilled for the vacuum fitting.
Every model A around here has those manifolds except the foreign ones imported from the US.
|
Forum: Model A (1928-31)
04-15-2024, 07:47 PM
|
Replies: 13
Views: 1,133
Re: T Bakery Van
They could be anything. This is a cobbled together vehicle for promotion, after all. Advertisers care little about facts so anything goes. Could even be fake buns.
|
Forum: Model A (1928-31)
04-13-2024, 07:52 PM
|
Replies: 25
Views: 1,593
Re: Car will not start
To check whether the timing gear is stripped, there is no need to undo anything. Take the top off the distributor and watch the rotor as you crank the engine. If the rotor does not turn, the gear is...
|
Forum: Model A (1928-31)
04-13-2024, 07:34 PM
|
Replies: 6
Views: 602
|