32 5W coupe lid hardware
 

Its allot of work and info to learn.
I tested accid dip my 32 5W coupe trunk lid and this company is using ’soft’ accid and I’m very pleased on results so body will be next. I’m still wait on the metal guy so its time collect parts.
This body had few things in it so its allot of parts to be collected.
People stress me ; get done, get on it but the road find parts and info take time ( and I find the road fun ) and I’m not found on a more easy road use Taiwan stuff.
On trunk I found handle on Hawaii and repair was in France ( thanks Sheldon ) and the Hurd keys came from NY and now at a guy fix the key to look.
The plate and scews to lid in the body was there but I need find correct conical screws.
Look house was found on ebay but it miss the screws.
I also found the std Henry brace at ebay to hold lid up but again conical crews needed.
Then I need rivets to the part lock the lid.
Then it was a softer material ( zink ? ) inside lid ( se fragments on picture ) plus I need scews there to.
-so where can correct parts be found to this case ?

Re: 32 5W coupe lid hardware
 

Re: 32 5W coupe lid hardware
 

Deck lid hinge pins for upper corners of the deck lids of '32 standard coupes and standard roadsters without rumble seats pus latch at bottom of photo for inner lower back panel.