The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Correct rearview mirror (https://www.fordbarn.com/forum/showthread.php?t=297456)

bgzlbhd 04-18-2021 03:02 AM

Correct rearview mirror
 

Could someone show me a picture of the correct R and L rearview mirrors for a 31 CCPU

BRENT in 10-uh-C 04-18-2021 05:46 AM

Re: Correct rearview mirror
 

1 Attachment(s)
There is no such thing as a correct R/S mirror. If you want something close (-i.e.: NOT fine-point), then what we used on this AA is what you likely want.

Model A Ron 04-18-2021 01:01 PM

Re: Correct rearview mirror
 

What about the review mirror in the center of the windshield on a 29 Phaeton? I know mine is not correct but I do not know what the correct one looks like.

Oldbluoval 04-18-2021 03:41 PM

Re: Correct rearview mirror
 

All “correct” mirrors are detailed in the JS

CarlG 04-18-2021 05:43 PM

Re: Correct rearview mirror
 

There was no RH mirror on a LHD truck, only LH.

700rpm 04-19-2021 07:26 PM

Re: Correct rearview mirror
 

I found a RH tail light bracket for my ‘29 Tudor with Model A parts guy in NZ. Look for MAFCA clubs in countries that drive on the right side of the road and contact one or all of those clubs to ask for assistance in finding a RH mirror for your truck.

McMimmcs 04-19-2021 08:14 PM

Re: Correct rearview mirror
 

Quote:

Originally Posted by 700rpm (Post 2008907)
I found a RH tail light bracket for my ‘29 Tudor with Model A parts guy in NZ. Look for MAFCA clubs in countries that drive on the right side of the road and contact one or all of those clubs to ask for assistance in finding a RH mirror for your truck.

Very good advice from someone that knows!

stanley07 03-07-2024 07:46 PM

Re: Correct rearview mirror
 

I have been searching the forum for info on how to repair a loose outside rearview mirror on my 1930 CCPU? Not sure how one tightens the 'grip on the ball'?

Ruth 03-07-2024 08:12 PM

Re: Correct rearview mirror
 

Quote:

Originally Posted by stanley07 (Post 2296132)
I have been searching the forum for info on how to repair a loose outside rearview mirror on my 1930 CCPU? Not sure how one tightens the 'grip on the ball'?

A lot of mirrors have 3 screws on the back, try tightening them a little.


All times are GMT -5. The time now is 07:30 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.