Model a rear axle tubes,torque tubes,wishbones ect
 

City: nor cal

State: california

Price: 75+

Hello I have several cleaned on the inside and cleaned n primed on the outside model a rear axle tubes.

I also have cleaned and primed torque tubes, these are a pain to clean on the inside


as well as rear wishbones cleaned n painted and one that need to be redone as well



also have many model a flywheel cores,transmission cores car and truck and
complete front and rear ends,


and some rusty blocks and roller wire wheels I would like to sell cheap


I have other "a'" parts feel free to look at my other posts and

i am looking for a good 30/31 pu back, a 30/31 roadster cowl and possibly doors and also possibly 30/31 pu/sedan doors

thank you

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

btt if you are interested please let me know and feel free to send me your email if you would like pictures of parts and you phone # if you have any additional questions

thank you

and I am still looking for the parts at the bottom of my add

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

interested in the wire wheels. are they 19 or 21 inch? and can you send me pics to [email protected]

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

any radis rods?

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

You wouldn't have any old spring perches? I am building a front end demo unit for the club and I would like to have one to show.

Thanks

Mike

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

have several sets of radius rods. send lincoln your email, and we will contact you. Bob

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

hi bob do you have original 28-29 good shape front U bolts top & bottom plates , 2 sets thanks john from duncan can.

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

[email protected] looking for radis rods.

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

dave have all three versions of radius rods, don't have any idea what freight would be where are you located?
no on front u bolts and bottom plates.
Bob

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

Have spring perches. Will see if I can find a single. They can be troublesome to remove from the axle. Bob

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

btt thank you

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

back to top if you are interested feel free to send me a private message

thank you

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

Thanks for looking for the spring perch. Do you have a contact # ? Please email it to me at

[email protected]

Thanks,

Mike

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

btt

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

if interested please pm me thank you =)

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

btt thank you fordbarn

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

btt if you need any of this please pm me =)

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

please pm me if interested in any of it thank you

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

I think I saw also,complete rear ends. I need rear end for a 1930 tudor , [email protected]

Re: Model a rear axle tubes,torque tubes,wishbones ect
 

The complete rear end is probably 28. It was hooked up to a multi disk clutch setup. The rear radius rods on the complete assembly with the torque tube and drive shaft are the early ones. Bob