1954 Mercury teapot carb troubles.... Advice needed...I disassembled the carb. part-way and found (2), not one small ball bearings as check valves in the accelerator pump circuit? or did I not notice and one came from some different port?
I have a high speed miss that is driving me crazy...when I rev the engine up even in my shop (so no load) the thing spits and backfires somewhat...is the problem in the power circuit or does it need bigger main jets??? I thought the power valve is just enabled during heavy pull like up a hill... My buddy thinks there should be a metal sleeve around that weird carb so it can act like a regular carb.... Also all the old foam in the air cleaner had turned into turd like material so I had to remove it all and so now I have some breathable foam in air cleaner to act as normal restriction would be... thanks in advance for any info. |
Re: 1954 Mercury teapot carb troubles.... Hi ,I sent a reply to your private message I got. Not sure I did it right . Hope it sent to you. Bill
|
All times are GMT -5. The time now is 11:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.