1930 Model A PIckup rear end questio... In the process of restoring my father's 1930 Model A Pickup that was sold out of the family when i was 10 (1976) and recently reacquired this year :)
I have the cab and bed off the frame and something interesting is installed on this vehicle. So in the cab area mounted on the inside of the firewall is what looks like a chamber with 3 rubber hoses leading out of it along with a pull lever know that was attached to the steering column. Now 2 of the hoses ran from the coupling chamber back to a device on the rear axle right hand side. The other hose runs through the firewall and attaches to a copper tube into the intake manifold. Now my buddy says it appears to be some sort of vacuum setup but we are not sure what it is controlling in the rear end. Could this be some sort of limited differential slip setup or lockout? Unfortunately i started taking the pickup apart before checking out the function of that setup. Bill |
Re: 1930 Model A PIckup rear end questio... Some pictures might help
|
Re: 1930 Model A PIckup rear end questio... Working on the picture part - Just thought someone may know off the top of their head for now :) I will attempt to get a shot this evening
|
Re: 1930 Model A PIckup rear end questio... It could be a Columbia two speed axel from a later model Ford. They are vacuum engaged. Is there a canister mounted on the passenger side of the differential?
|
Re: 1930 Model A PIckup rear end questio... |
Re: 1930 Model A PIckup rear end questio... After more research, it seems my 1930 Pickup may have the following rear end:
http://www.hemmings.com/hmn/stories/...feature21.html Which i believe would be a 1934 or later axle? Is this a good think if it is in working condition? If not can it be removed and a cover put in it's place? |
Re: 1930 Model A PIckup rear end questio... Looks like you've got a columbia rear end,(very advantagous). Ck in over on the EV8 board for more info/questions you might have. Could also do a search over there for more info.
Happy motoring. Paul in CT |
Re: 1930 Model A PIckup rear end questio... its a columbia 2 speed. Another way to get an overdrive. Very desireable among V8 enthusiasts. To put one on a model A must have required some adaptations. Do you have hydraulic brakes?
Parts are available from John Connelly box 891311 Temecula Ca 92589 phone: 951-719-4077 email: [email protected] www.columbiatwospeedparts.com |
Re: 1930 Model A PIckup rear end questio... That is a pricey rear end! If you wanted to restore the truck to original, and install a correct A rear end, you could sell that rear end for around 1000.00, if it is in working order. Nice find.
|
Re: 1930 Model A PIckup rear end questio... I have Columbia OD,s that I have modified in both my A,s.One has been in use since 1960.I wouldnt drive an A in modern traffic conditions without an OD.That OD of yours is worth more than $ 1,000 if its in good shape.
|
Re: 1930 Model A PIckup rear end questio... Yes - My Model A pickup DOES have hydraulic brakes - Just had the drums powder coated semi-gloss black :)
|
Re: 1930 Model A PIckup rear end questio... So basically i should take it apart and determine if it is in working order with nothing broke? Or is there a method i can verify by rotating the rear wheel by hand and engaging it? (up on blocks with bed and cab off)
|
Re: 1930 Model A PIckup rear end questio... If someone changed your stock MECHANICAL brakes to hydraulic and the car sat for 1/2 year or more, the only way I'd feel safe about the brakes is to remove the drums and check the wheel cylinders for leaks. They often rust and leak from setting unused. Also check the hoses for cracks.
|
Re: 1930 Model A PIckup rear end questio... Actually drove the car around the block and tested out brakes and what not - but had NO idea about the Columbia OD so i did not check that out when it was running before i tore it apart to restore even better :) I am replacing the wheel cylinders and master cylinder with the kit from Macs in New York
|
Re: 1930 Model A PIckup rear end questio... That columbia (if working correctly AND with all the controls) probably worth around $3,000. JMO
Paul in CT |
Re: 1930 Model A PIckup rear end questio... Bill,
Definately a columbia.... As Pat from Santa Cruz says John Connelly is the guy who supplies parts and can advise you on it, however, I will let you know he won't like the fact that it's in a Model A... He's a firm believer they should only be in the V8's..... Since you already have it... I'd leave it... just make sure the adaptation arrangements... ie, axle housings, spring hanger arrangements are top notch. I can't see them from the photo. Columbia's have some inherent weaknesses in several of the internal parts. Modifying them or "Bulletproofing" them so to speak is what John does along with selling rebuild parts, etc. He is excellent... Properly rebuilding a columbia depending on what it needs, and is a job that is best handled by someone schooled in them. Rebuilding depending on what's wrong can be expensive. Call John for advise. Parts are available from John Connelly box 891311 Temecula Ca 92589 phone: 951-719-4077 email: [email protected] www.columbiatwospeedparts.com I agree.. .the axle is worth more than 1K if good. Good luck! Larry S |
Re: 1930 Model A PIckup rear end questio... Quote:
|
Re: 1930 Model A PIckup rear end questio... Bill,
Don't forget about Moss auto parts in Orange Ca, if you need parts quick, great guys there and bins of old parts to look through are a lot of fun! |
All times are GMT -5. The time now is 09:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.