anybody seen these?
 

saw these on ebay.. . .anybody bought them?

Re: anybody seen these?
 

Hi ford nut. No I have not seen them, but, I'm interested , Had a look on ebay but couldn't find them, Could you give me more info please. I'm in Australia. Cheers critter

Re: anybody seen these?
 

i cannot. i saw them again on craigslist, maybe sacramento ca. although i just looked and don't see them now. a person could save some ratty fenders with those. i think they were 85.00 each. i saw them about 2 months ago and saved the pics. good luck. i hope this is not a tease.

Re: anybody seen these?
 

If the inside edge of the fender is flat, it is likely for a woodie or a truck. They were somewhat rare, so many were auctioned off when a dealer closed. For someone who needs them, they are very valuable.

Re: anybody seen these?
 

I have seen them on Ebay Motors with Vintage Parts and Accessories for 1936 Ford.

Re: anybody seen these?
 

I wonder if there is a commercial outfit making them. Look an awful lot like '40-'47 pickup and should work on a panel since it's just the outer edge.

Re: anybody seen these?
 

my ebay search was 1936 fenders. the radius may work for others if they should ever turn up again. i was kind of hoping that someone would have some solid info on them. i got past my rear fender problem by working the lip for about 3 days with a 2 inch metal form i ground out and fitted with lots of tapping, shrinking. i'v got one more fender to do.

Re: anybody seen these?
 

They are on eBay right now
1936 reproduction Ford left and right rear wheel arch
For Ford 1936 sedan. May fit others. Check it out.
Item number 174001668098

Re: anybody seen these?
 

thats great! get em' while they're hot. . . .

Re: anybody seen these?
 

With the price of fenders they’re worth the $85.00
Hope they work for you.

Re: anybody seen these?
 

i finally got past my messed up fender,had to add i bit of new metal to it, but not the lip. the rear point is new. the lip was the worst part but i was able to save it. here's a some pics. one to go.

Re: anybody seen these?
 

Very nice, great job. Hope those fender lips work you. Will save a lot of time.