1939 truck windshield frame screws? Had to drill the heads off the screws to get my windshield frame out so I could get glass put in it. Are all the holes the same size/thread? Only 1 screw came out and it looks to be 10-32. It’s from the frame join. I am trying to find what size to drill and tap the holes. I read through some old threads and some say 10-32 for some holes and 12-24 for other holes. Then some say 10-32 for all holes
|
Re: 1939 truck windshield frame screws? C&G Ford Parts has them listed for 6.95 the set but out of stock. Try Midwest Early Ford;Joes Antique Auto,ThirdGen or V8 Ford sales,Ace Hdwe?
3108A WINDSHIELD FRAME SCREWS - 35-39 PASS/PICKUP SET OF 8 OUT OF STOCK EMAIL OR CALL FOR OPTIONS |
Re: 1939 truck windshield frame screws? Sorry my question was a bit vague so I edited it. I was trying to ask what size to drill and tap the holes
|
Re: 1939 truck windshield frame screws? I come up with 10-32 from an extra screw I had left over
12X24 might be the for the hinge. . |
Re: 1939 truck windshield frame screws? I looked around and can only find them in stainless so I got a bag of screws from third gen they looked ok in their picture but they are a wee bit short at half the length of the only original screw I was able to get out. The screws on carpenter site look like they might be longer in their picture.
Any recommendations on where to get them? Is there any place that has them not stainless? |
Re: 1939 truck windshield frame screws? I could only find slotted oval head 10-32 machine screws in brass at McMaster-Carr:
https://www.mcmaster.com/products/ov...ad-size~10-32/ |
Re: 1939 truck windshield frame screws? Photos of the truck, please. Best wishes for an easy resto.
Clem |
Re: 1939 truck windshield frame screws? 1 Attachment(s)
Here is a pic of 2 I have.Oval head correct or flat head?
|
Re: 1939 truck windshield frame screws? Quote:
|
Re: 1939 truck windshield frame screws? 1 Attachment(s)
Quote:
The ones in your picture have 5 turns of thread the one I got out has 7 and the ones I bought have 4. I got that one out of the frame join which I would assume would be shorter than the screws that hold the arms and hinges on. Out of the 17 screws I got 1 out of the top side of the join, left 4 in the bottom side of the join and drilled the rest from the join (3) hinges (6) arms (4) |
Re: 1939 truck windshield frame screws? Ford 350152-S is the join screw, This is a special screw that has a slightly larger head and shallower countersink than common 82 degree 10-32 oval head. I remembered there was something special about these but could not remember the details until the above picture posted.
|
All times are GMT -5. The time now is 02:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.