The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   '39 bottom door seals (https://www.fordbarn.com/forum/showthread.php?t=19632)

Dak Rat 11-04-2010 04:22 PM

'39 bottom door seals
 

Bought a pair of Drake's bottom door seals for my '39 sedan. They don't come with any instructions and my doors were bare, so never saw any originals on the door. I can't figure out how they are to be installed. There are no holes in them for screws or clips or anything. Anyone installed these things that can shed some light on the problem. Thank you.

19Fordy 11-04-2010 06:11 PM

Re: '39 bottom door seals
 

7 Attachment(s)
Quote:

Originally Posted by Dak Rat (Post 107106)
Bought a pair of Drake's bottom door seals for my '39 sedan. They don't come with any instructions and my doors were bare, so never saw any originals on the door. I can't figure out how they are to be installed. There are no holes in them for screws or clips or anything. Anyone installed these things that can shed some light on the problem. Thank you.

Here's the way they install on a 1940 Ford coupe. Hope it helps.

Dak Rat 11-04-2010 06:55 PM

Re: '39 bottom door seals
 

Thanks for the pictures. I have the seals that go on the rocker panels mounted. The ones I'm having difficulty with are the ones that mount right on the bottom of the door itself. They look like they should mount under the edge of the door panel. Maybe I'll have to call Drakes and see what they say.

jerry grayson 11-04-2010 08:26 PM

Re: '39 bottom door seals
 

I do not think that a door seal goes on this car. The rocker panel seal is it.

39 STD 11-05-2010 09:27 AM

Re: '39 bottom door seals
 

No seals on my doors bottom. Only the seal on the rocker.

39portlander 11-05-2010 06:13 PM

Re: '39 bottom door seals
 

I'm restoring a 39 P/U, door seal was on the rocker and not much left. I used the seal strip like what is on an econoline's bottom door. It comes round with plastic pins that protrude into holes I drilled. It seals good and looks good. Will post pictures when the cab is closer to finished.

Dak Rat 11-06-2010 09:50 AM

Re: '39 bottom door seals
 

Problem resolved. What I thought were rubber seals to go on the door were simply replacement rubbers that go under the stainless steel piece that screws to the rocker panel. It would be a real bugger to replace the rubber on the original stainless piece as they are crimped between two pieces of metal. Thanks to all for advice. I guess I don't know as much about '39 fords as I thought I did.

Planojc 11-06-2010 08:53 PM

Re: '39 bottom door seals
 

Actually it's easy. Just pry it open with a screw driver, insert the new rubber, and crimp it with pliers.


All times are GMT -5. The time now is 12:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.