grease your u-joint Now is the time to grease all those hard to get to fittings. I just finished replacing the driveshaft u-joint in my 47, what a job!! I know its one of those fittings we tend to forget but a tube of JD cornhead grease and a minute or two is much easer than than what I just went through. Not fun.
|
Re: grease your u-joint Quote:
|
Re: grease your u-joint vibration, a clunking noise when using reverse, sometimes it only vibrates when you let off on the gas. If it breaks at road speed be sure you are wearing good sneakers and know someone with a trailer.
|
Re: grease your u-joint Yes this is a pain in the butt to get to, but if you dont there will be problems. Thanks for the reminder
|
All times are GMT -5. The time now is 04:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.