3speed side loader cluster gear plate I'm rebuilding an 889A 3 speed side loader. It needs a cluster gear rear plate, but the only one available is 32-16823-1 which is "thick" at 0.180 inches. I need one at 0.120 inches. Is one available?
|
Re: 3speed side loader cluster gear plate Call Mac @ Van Pelt Sales.
|
Re: 3speed side loader cluster gear plate http://www.vanpeltsales.com/index.htm
He also has a great book on transmissions. |
Re: 3speed side loader cluster gear plate 899A=1948 100HP, the rear cluster should use both the smooth washer 8M-7128, 0.045 to 0.047" and 8M-7129 thrust washer 0.138-0.140" the hole in the center of the thrust washer is somewhat bow tie shaped.
|
All times are GMT -5. The time now is 10:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.