Bumper Hitch / Mullins I plan on towing a vintage 1936/37 Mullins trailer with my 1938 Ford V8 60 Coupe. The trailer will always be lightly packed. I cannot envision any reason why I wouldn't be able to use a period correct bumper hitch. Please enlighten me with your knowledge and experience with their use.
The trailer weighs 465 pounds and has a capacity of 1,200 pounds. I would not be packing it more than 200 pounds. |
Re: Bumper Hitch / Mullins That would be the type that clamps on the bumper, I have one somewhere,.
|
Re: Bumper Hitch / Mullins I also have a Mullins and don't think you would be beyond the capabilities of the era hitches providing the bumper is mounted solidly.
|
Re: Bumper Hitch / Mullins Sounds like fun if you're not going very far or want to get there in a hurry!:)
|
Re: Bumper Hitch / Mullins Quote:
|
Re: Bumper Hitch / Mullins Quote:
|
Re: Bumper Hitch / Mullins We do go far, but not fast and always on less traveled roads.
|
Re: Bumper Hitch / Mullins One concern: If your bumper is a reproduction, those bumpers are not spring steel as the originals were, and will bend easily. To determine if it is original, look at the backside of the bumper to find the ridge in the middle. Repros have no ridge.
|
Re: Bumper Hitch / Mullins Also, yes, a loaded trailer is more stable, and the load should be as far forward as possible.
Watch out for railroad tracks on those back roads! I failed to slow for one and got airborne! |
Re: Bumper Hitch / Mullins My Mullins is pulled behind my '40 Ford Coupe. We have gone from Texas to Niagara Falls, NY to Dearborn, MI and back to Texas without any problems. If you are using the original Mullins hitch you will need a 1 3/4 trailer ball. Going down the road you do not know it is there... but you cannot back up with it. Too short. If you travel it is great to have it.
|
Re: Bumper Hitch / Mullins Quote:
|
Re: Bumper Hitch / Mullins Thanks for all the help and replies. The bumper is original. Look for me on the road.
|
Re: Bumper Hitch / Mullins I would be concerned about the bumper hitch that it would put a lot of strain on it. Those trailers are light even loaded and bounce a lot behind our cars. I watched a friends mullins bounce off the road many times , with the roads we drive on , he had a hitch attached to his frame. I guess it depends how fast you travel , but I think over time you might see some
damage to your bumper .... just my 2 cents |
Re: Bumper Hitch / Mullins I would be more concerned about the '38 V8 60 having enough power to pull the car with passengers and trailer.
My father had a '38 Ford V8 60 in 1947. My father described the Ford as not having enough power to pull a wet cigarette butt out of the gutter With just dad and I in the car it really struggled on the highway. My father got rid of the Ford when he was able to buy a replacement, a second series 47 Chevy. |
Re: Bumper Hitch / Mullins I also was thinking about power.
|
Re: Bumper Hitch / Mullins Post pics when it's all hooked up!
|
Re: Bumper Hitch / Mullins 2 Attachment(s)
I have pulled a Mullins trailer with my 32 Ford for several years, and I feel just a minimal period trailer hitch isn't safe!! I created a hitch that didn't rely on the bumper for strength, but ties into the frame with a cross brace, and receiver tube. The receiver tube is bolted to a cross plate from the two bumper bolts. I have made 3 of the hitches, and they really work, plus they are "SAFE"!!
|
Re: Bumper Hitch / Mullins Beautiful job Doug!
Ken |
Re: Bumper Hitch / Mullins Quote:
https://www.fordbarn.com/forum/attac...5&d=1711400133 |
Re: Bumper Hitch / Mullins Worst case scenario:
You have just hit the Lotto and bought a very rare car of your choice for half a million dollars. You have been out driving in it with the family. As you sit waiting for traffic to clear so you can turn in your home driveway, you see a Mullins trailer heading right at you in your lane with only a piece of original spring steel bumper attached. 86 years of metal fatigue have ruined a perfectly good trailer. |
All times are GMT -5. The time now is 01:33 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.