Anyone seen a threaded gas cap with ears? My first Model A, many years ago was a 1929 special coupe. It had an accessory gas cap that had two ears on top. I wish I still owned it or at least had taken pictures of it. Have any of you guys ever seen one?
Regards, Neil |
Re: Anyone seen a threaded gas cap with ears? Something similar to the 4-eared one in this current eBay link? DD
http://i.ebayimg.com/00/s/MTIwMFgxNj...UsW3f/$_35.JPG http://www.ebay.com/itm/Gas-Cap-BRAS...#ht_217wt_1105 |
Re: Anyone seen a threaded gas cap with ears? Sure it wasn't a Chrysler cap with wings? Bob
|
Re: Anyone seen a threaded gas cap with ears? Looks like a cap for bulk oil or fuel.
|
Re: Anyone seen a threaded gas cap with ears? It wouldn't be too hard to make one with a TIG welder and a lathe.
Getting a little creative you could make it look like Mickey Mouse or if you preferred bigger ears, Dumbo. |
Re: Anyone seen a threaded gas cap with ears? V8COOPMAN, thank for the info about the ebay cap. the threads appear to be the right size and I may bid on it. The cap I had was similiar, but it had only 2 ears, and Pete, the 2 ears were rounded and did look like small mickey mouse ears.
Neil |
Re: Anyone seen a threaded gas cap with ears? I also thought it looked like a vintage bulk oil or bulk Varsol or kerosene container. Wayne
|
Re: Anyone seen a threaded gas cap with ears? Quote:
|
Re: Anyone seen a threaded gas cap with ears? I think these were originally Buick gas caps in the late teens thru early 1920's - I have one with an accessory hood ornament somewhere at home - I'll post pictures tomorrow if you need.
|
Re: Anyone seen a threaded gas cap with ears? Hello Neil- If you go to my web site, olympic-speedsters.com , and watch the pics scroll across on my home page, there is a pic of a red and white speedster that I designed and built that has a gas cap on the rear that I designed and had a couple dozen (12 ea. brass & aluminum) cast up, which I then dressed and polished and internally threaded for '29 Ford gas tank neck. You can just see the top of it, and I can't get any more pics of it at this time. If you want a better pic, I will have to get someone who knows how to do the pic thing on my computer.
|
Re: Anyone seen a threaded gas cap with ears? The saddle tanks on our International R-190 dump trucks from the 50's and 60's had caps real similar if not identical to the cap from V8COOPMAN's ebay link they were bronze also.
|
Re: Anyone seen a threaded gas cap with ears? Quote:
Wayne |
Re: Anyone seen a threaded gas cap with ears? When i worked at ups they used a cap a cap like number 2 shows. I think it was made by velvac and it was bronse.
|
Re: Anyone seen a threaded gas cap with ears? Which way was she running the last time you saw her...
But I gotta say Coop, I prefer your alternate mode of transportation shown in your Avatar. What is that an old Piper Twin and do you still have it? |
Re: Anyone seen a threaded gas cap with ears? I have a brass cap with two rounded "ears" on it, a small vent hole in the middle indicates use as a gas cap, and I have tried it on my 1929 Phaeton and it screws into place fine. If it once was plated the plating is gone, and what shows is brass with worn out black paint. If anyone is interested it is available. Send me a PM or eMail [email protected].
|
Re: Anyone seen a threaded gas cap with ears? |
Re: Anyone seen a threaded gas cap with ears? Quote:
https://www.fordbarn.com/forum/attach...1&d=1421249020 |
Re: Anyone seen a threaded gas cap with ears? That's what I thought looking at it......
Paul in CT |
Re: Anyone seen a threaded gas cap with ears? Quote:
|
Re: Anyone seen a threaded gas cap with ears? Quote:
|
All times are GMT -5. The time now is 09:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.