1928 Model A wiring schematic Any body out there have a full page of the wiring that is printable?
I found one from an earlier post but it so small that it is not readable. I tried to zoom in on it, but that didn't help either. Thanks, Harry |
Re: 1928 Model A wiring schematic |
Re: 1928 Model A wiring schematic Mike,
That mite not be correct for his "28".....depending on what is on his car. |
Re: 1928 Model A wiring schematic Thanks Mike,
Now to get it shrunk to fit on one page.......my problem. Harry |
Re: 1928 Model A wiring schematic Is the red wire coming off the ignition switch go on the negative or the positive side of the coil
TKS |
Re: 1928 Model A wiring schematic Dudley is correct, the diagram posted above is for the later 2 bulb systems, not the cars with single bulb headlights. Note there is a DIM on the diagram which 28 don't have. They only have BRIGHT and PARK. 28's only have 2 positions for the light switch besides OFF. Later A's have 3 positions besides OFF. Hope this helps.
Rusty Nelson |
Re: 1928 Model A wiring schematic Something is probably better than nothing...................
paul in CT |
Re: 1928 Model A wiring schematic There is a BIG difference....
Harry...inside your "light switch", is there 3 or 4 brass contacts, that turn with the horn/light rod? You need to know this 1st. |
Re: 1928 Model A wiring schematic mrroosk, if you wish to print the picture on one page just do the following. Hover your curser over the picture and do a right click on your mouse. A dialog box will appear. from this dialog box click "save picture as" and choose a location to save it to on your computer. then open the file on your computer and print the picture as a normal photo. You should be able to print picture in any standard photo size or A4. Trust this helps
|
All times are GMT -5. The time now is 10:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.