reverse eye spring Hi, I am new to the forum. I am starting an A v8 roadster with a 59A flathead. I need a front28-34 reverse eye spring with 3/4" eyes to match spring perch. Model A has smaller shackle bushings. I can buy a new reversed main leaf with 3/4" eyes but I also have to buy a new standard spring to put it on. I do not want a Posie or easy slide spring.
Does anyone sell a complete reversed standard spring? Thanks,John |
Re: reverse eye spring Quote:
|
Re: reverse eye spring I had a new main leaf made at truck spring shop. Cost about $60. Took old one and told them to make same arch but reverse eye.
|
Re: reverse eye spring If you go over to our sister site The HAMB you can search for many threads showing exactly how to do this. Not hard to do especialy if you have access to a press of some kind. But as stated you can do it with a dead blow and some blocks. Wear ear and eye protection.
The HAMB is also a great place for info on building an A-V8 trditional stlye car. |
Re: reverse eye spring Thank you for the information. I will check HAMB.I am a new member there also.
John |
All times are GMT -5. The time now is 02:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.