51 Fordomatic torque converter hub needed Does anyone have or know where I can locate the hub piece on a 51 Fordomatic torque converter? This would be the driver for the front pump. It seems that the 51 had a longer reach than later models. Mine had one of the ears found broken off when disassembled. Thanks...
|
Re: 51 Fordomatic torque converter hub needed Try Fatsco transmission in New Jersey.
|
Re: 51 Fordomatic torque converter hub needed They show a 52 and up online but I will call to see. Thanks
|
Re: 51 Fordomatic torque converter hub needed Jim, that hub will not fit up to an 8BA crank or an 8CM crank, the '51 and later 1BA and 1CM cranks have the larger recess machined to accept the O-Matic hub. That damage could have resulted from a previous mismatch.
|
All times are GMT -5. The time now is 10:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.