The Ford Barn - Oil Pressure & Temp Gauge from Sweden

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Oil Pressure & Temp Gauge from Sweden (https://www.fordbarn.com/forum/showthread.php?t=333295)

Old Redneck

11-23-2023 11:23 AM

Oil Pressure & Temp Gauge from Sweden

1 Attachment(s)

I think it pretty rare here in the USA. Its the only one I have ever seen. I will try to post a picture of it.

deuce lover

11-23-2023 11:59 AM

Re: Oil Pressure & Temp Gauge from Sweden

What is the application?

petehoovie

11-23-2023 01:35 PM

Re: Oil Pressure & Temp Gauge from Sweden

Quote:

Originally Posted by Old Redneck (Post 2271808)

I think it pretty rare here in the USA. Its the only one I have ever seen. I will try to post a picture of it.

petehoovie

11-23-2023 01:39 PM

Re: Oil Pressure & Temp Gauge from Sweden

1 Attachment(s)

I use the SMITHS Dual Gauge (from England) in my '34 - Very accurate...
https://www.fordbarn.com/forum/attac...0&d=1700764666

Randy in ca

11-24-2023 01:23 AM

Re: Oil Pressure & Temp Gauge from Sweden

If my math is right, 3 kg/cm2 equals approximately 42 psi

fortyonerag

11-26-2023 02:54 AM

Re: Oil Pressure & Temp Gauge from Sweden

Whenever I see the twin Smiths unit I wonder why no one made a twin water heat unit for flatheads.

tubman

11-26-2023 03:27 AM

Re: Oil Pressure & Temp Gauge from Sweden

1 Attachment(s)

Quote:

Originally Posted by fortyonerag (Post 2272312)

Whenever I see the twin Smiths unit I wonder why no one made a twin water heat unit for flatheads.

You could always use one of these originally made for two-cylinder snowmobiles :

fortyonerag

11-27-2023 12:56 AM

Re: Oil Pressure & Temp Gauge from Sweden

^^^^^Interesting. Not the look I'm after, but this has potential. Thermocouple probes as well.....

All times are GMT -5. The time now is 10:58 PM.