The Ford Barn - Waterpump model

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Waterpump model (https://www.fordbarn.com/forum/showthread.php?t=254213)

naijkee

11-04-2018 06:46 AM

Waterpump model

1 Attachment(s)

Hi guys!

Mounting a new radiator, and it seems to me that my Ford Standard 1939 have water pumps that are not originals. At least the location of the outlets? All waterpumps seems to have forward mounting for the hoses. My waterpumps creates an angle that forces me to have a 90’ angle hose. Not a problem, but still very confusing! Sorry for the crapy pic!

flatheadmurre

11-04-2018 07:09 AM

Re: Waterpump model

You have a 60hp engine and they have that kind of outlet.
What are you missing the lower hoses witt the 90degree elbow ?

naijkee

11-04-2018 07:15 AM

Re: Waterpump model

Quote:

Originally Posted by flatheadmurre (Post 1692524)

You have a 60hp engine and they have that kind of outlet.
What are you missing the lower hoses witt the 90degree elbow ?

Okay thanks!

Yep Im missing the lower hoses with 90degree angle! Point me in the right direction. Macs ? Bobdrake?

JM 35 Sedan

11-04-2018 07:46 AM

Re: Waterpump model

I believe someone is making those 60hp hoses again. Not sure if I read that here or saw something in a suppliers advertisement.

ULLRICH

11-07-2018 11:40 AM

Re: Waterpump model

I went to advanced auto and looked at the hoses that were in stock and found a 90 degree that "worked" for my sprint car with a V8 60. It had to be cut to length, but I was not concerned about originality as the application was done to strictly be functional.

JSeery

11-07-2018 12:09 PM

Re: Waterpump model

H & H Flatheads did sell a lot of 60hp parts but I can't find them now.

All times are GMT -5. The time now is 07:55 PM.