Panel below decklid, subframe, cowl panels, etc. for my 29 Roadster
 

City: Any

State: Any

Before I started riveting in reproduction panels, I thought I'd see if I could source any original stuff for my 29 Roadster.

I am looking for an under the seat pan, panel below the decklid, and any subframe parts or a complete subframe.


I would also like to find original lower cowl sides, an inner trunk panel annd trunk rain gutters.

Any help would be appreciated.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Bump
Also looking for original outside door handles, and original trunk lid hinges.

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Still looking.
Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Anybody?

Thanks,
dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Still looking.

Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

to the top

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Up again. Still looking.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

to the top

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Carter, please send me an e-mail at [email protected].

Dean

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Still on the hunt.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Still looking.

Thanks

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Bump

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Looking again.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Started on another project, so I'm looking for some original parts again before I buy reproduction stuff.

Thanks in advance.

Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Looking for some of the same stuff I was before. Also need cowl panels, firewall, subframe connectors, rear subframe crossmember, body wood, door hinges, etc.

All for 29 roadster, of course cowl panels, firewall, subframe connectors, crossmember, etc. can be from other body types.

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Still looking for all.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Up again. Still looking.

Thanks,
Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Anyone have any of these parts?

Dave

Re: Floor pans, curtain pan, braces, etc. for my 29 Roadster
 

Found quite a bit thanks to FordBarn. Still need panel below decklid, nice trunk lid, drivers door, dash rail and seat springs.
Also looking for 28/9 open cab pickup sub rails, floor pans, cab back, and also 28/9 phaeton rear doors and rear sheetmetal.

Dave