| Charlie Stephens |
10-12-2013 04:55 AM |
Re: Pinto motor mounts
Quote:
Originally Posted by BILL WILLIAMSON
(Post 742988)
I know of Pinto powered "A"s, running 4:11 gears & a Mitchell Overdrive, installed backwards as an UNDERDRIVE for mountain climbing. With Pinto's small displacement, you gotta' REALLY wind them up to get good performance!
Bill W. (I never mentioned Pinto's before, as some get REAL testy about such changes. Well, at least they used a FORD engine. If only the Pinto had 200 CUBIC INCHES, WOW!)
|
Displacement is one of the things I like about the Mercruiser Marine/GM Industrial engine. Not quite 200 but 181 cubic inches.
Charlie Stephens |
